In partnership con

Certifications

Adequate product and system component testing against wind and rain is essential for both regulatory compliance and overall quality control. The bioclimatic pergola has been tested to verify its wind resistance and rainwater drainage capacity. The results were particularly positive: the covering withstands heavy rainfall (rain load tested up to 230 mm/h) and violent winds (wind resistance tested up to 180 km/h).

A series of tests were conducted on the mechanical resistance of a Bioclimatic Pergola (data refers to a series of wind tunnel tests on a 3.1 x 3.03 meter pergola. It should be noted that the bioclimatic pergola is a solar shading system and is not suitable for creating closed and hermetically sealed systems).

Rain Load

The entire structure was subjected to rain intensity ranging from heavy (130 mm/hr) to very heavy (170 mm/hr) and even severe (230 mm/hr) without any deformation or breakage that could affect personal safety.

Wind Load

The bioclimatic pergola has been classified according to UNI EN 13659 with Wind Resistance Class 4, test pressure 250 N/sqm. The product was subjected, in the laboratory, to wind speeds of up to 180 km/h (without side wall) and 140 km/h (with side wall). The pergola withstood the test, with slight and insignificant stresses observed at the rotation axes. The test was performed with various slat positions (45° open, 90° open, closed flat).

CSTB Certification - Rain and Wind Resistance Test

CE Conformity

CE Marking and Declarations of Performance (DoP) are synonymous with transparency, quality, and safety, providing solutions always in line with our values. CE Marking guarantees consumers safe products that comply with European legislation.

CE Marking is mandatory for all products for which a European directive exists, and it is carried out by the manufacturer of a regulated product in the European Union, who declares, by means of the declaration of conformity or performance for construction products, that the product complies with the safety requirements set out in the applicable European directives or regulations. The bioclimatic pergola with adjustable slats and all ADARTE products meet the requirements of the reference Technical Standards and comply with:

  • the requirements of Construction Products Directive 89/106/EC and Appendix ZA of standard UNI EN 13561
  • the essential safety requirements of Machinery Directive 2006/42/EC
  • wind resistance: Technical Class 4
CE Declaration of Conformity